Ghost Immobiliser Fitting
Secure your vehicle from key theft hacking, cloning, and theft with the first aftermarket immobiliser for CAN. The Ghost app and GPS tracking can be connected to the immobiliser to send you notifications when your vehicle is stolen or tampered with.
The installation of the Ghost immobiliser is done by a qualified technician. It is important to have the right tools and heat shrink tubing.
Getting Started
Ghost immobilisers are an excellent alternative to physical theft devices like wheel locks and car alarms. They safeguard your vehicle without using LED indicators or key fobs. Instead, they connect directly to the ECU's CAN data network and will only start after entering a PIN code sequence. This provides a higher level of protection against key hacking, ECU swapping and cloning.
Installing a ghost immobiliser Birmingham requires a high level of agility and accuracy. It's like tiptoeing through a minefield; one misstep can cause serious damage to the circuits of the electrical system of your vehicle. To avoid this, it's vital that you understand the process of installation and prepare your vehicle for the installation process.
First, you need to prepare the vehicle by taking out interior panels to make room for the immobiliser device. Once you have found the perfect location to conceal it then use cable ties to secure it. Clean up your wiring by connecting loose wires and using insulation tape to cover any exposed connections. This will reduce the chance of short circuits that are not intended to be there as well as improving the appearance and reducing the possibility of tampering with by thieves.
Finally, identify a source of continuous 12V power and an earthing point for the ghost immobiliser. Once you've identified these connections, test the power cables using a multimeter, to ensure they're delivering a consistent voltage. Connect the CAN H & the CAN L wires from the immobiliser to the power source and grounding points.
After you've made all the necessary connections It's crucial to double-check the connections and examine the immobiliser for signs of corrosion or other damage. By entering a PIN and then starting the vehicle is a great method to test the system. This should be a regular part of your routine since it allows you to detect any intermittent problems early. Regular testing will also help to improve the longevity of the device and ensure that it is running at its peak performance.
Preparing your vehicle
Installing a Ghost immobiliser is a process that requires skills and knowledge. A wiring diagram is essential for finding the correct wires, making precise connections, and ensuring safety. A multimeter can be used to verify electrical values and ensure security. Cable ties and insulation tape can be used to guard the connections from tampering and to ensure they are secured. A user's manual is provided for your Ghost Immobiliser. It will give you specific instructions that are tailored to your model.
Once installed, a ghost immobiliser can stop unauthorised engine starts by requiring the driver to enter a unique PIN sequence using buttons on the steering wheel or centre console. The code can be changed at any time by the owner by hand or remotely using a mobile app. The device is silent and undetectable by thieves, because it doesn't emit any radio frequency.
A ghost immobiliser is connected to the CAN bus of the vehicle, which is a network that communicates with the electronic control units (ECUs) of the vehicle. It intercepts signals sent by ECUs and then blocks the engine if a false signal is detected. The system is tamperproof and weatherproof, with no key fobs or LED indicators to attract the attention of thieves.
It can be positioned behind or in a more obscure area so that it's not easily spotted by thieves and does not interfere with vehicle's performance. It can be mounted in a small container so that it is less likely to be observed by fraudulent salespeople when they test drive.
Its discrete operation and integration with the vehicle's CAN bus network make it a powerful deterrent to the latest methods of car theft, like key cloning and signal relay attacks. The system can be integrated with other security measures to create a powerful barrier that can deter even the most persistent thieves. This is why more insurance companies are now advocating or even requiring ghost immobilisers to be installed, since it can significantly reduce the cost of insurance.
Making Connections
Unlike traditional security systems that are heard by thieves ghost immobilisers are silent and prevent them from knowing when your vehicle has been switched on. They also block high-tech methods of stealing vehicles such as OBD hacking. Installing them without leaving permanent marks on your vehicle is an excellent option for those who intend to sell the car in the near future.
The Autowatch Ghost 2 is a immobiliser for CANbus that is one of the most reliable and current solutions to stop car theft. It makes use of the CAN data network to shut down your engine and generates a PIN code that only you know, which means it's hard for thieves to detect. It can be used on a wide range of automobiles, and it can work with all the features that are already in place like car alarms and steering wheel locks. GPS trackers, and door lock bypass.
If you choose to use a Ghost immobiliser for your vehicle, be sure to refer to the wiring diagram to determine the wires to connect. Double-check their locations to ensure they're correct, and then label them or tape them to help keep track of them. You'll also need to locate a reliable power source (12V) for the system, as well as an earthing. Once you have these in place, you can start to connect the components to complete the installation.
The ghost immobiliser will not allow your vehicle to start until you enter a pin code through the buttons on the steering wheel or dashboard. This will stop ECU hacking keys cloning, hacking, and other techniques of theft. It can also be paired with other Thatcham approved security accessories like alarms or tyre clips to provide your vehicle with an additional level of protection.
As the UK automotive aftermarket industry continues to grow and expand, so do the options to secure your vehicle. With so many ways for thieves to break in and steal your vehicle it's crucial to do everything you can to protect it from being stolen. Ghost immobilisers are a popular option among car owners who are responsible.
Testing the System
The Ghost Immobiliser communicates with the vehicle's ECU using a CAN network. This stops the engine from being started until the PIN code has been entered. This makes it very difficult for thieves to copy the key fob of your car and start your car, and even more difficult to disable the system through hacking into its electronic components.
Ghost Immobilisers can also be used with GPS tracking devices to help you locate your vehicle in the event that it's stolen. This feature is not commonly found in aftermarket security products, but it is an excellent option to boost your vehicle's security and give you peace of mind.
In addition to providing enhanced security and security, the Ghost-II immobiliser also provides a comfortable user experience by eliminating the need for additional key fobs and devices. It features a simple and intuitive PIN code entry system that integrates seamlessly into your everyday routine. It also comes with convenience features and deactivation options that allow you temporarily disable the immobiliser so that you can park or service your vehicle.
Before you begin the installation process, be familiar with your vehicle's wiring and prepare the necessary tools. A basic set of hand tools will provide you with the flexibility to create precise connections, and a multimeter is a great tool to check electrical values. Insulation tape and heat shrink tubing are essential for protecting connections from short circuits, and cable ties can be used to hold the wire in the right place. It is also essential to work in a well-lit location and wear safety gear when working with tools and electrical components.
After you've completed the installation, you must test the Ghost immobiliser to make sure that it's functioning properly. It is recommended to first start the car without entering the PIN. If this doesn't work then you'll have to try again and check the connections more thoroughly.
The Ghost Immobiliser, unlike other security systems, is a secret device which cannot be identified by thieves. It is also more effective than physical deterrents such as wheel clamps and steering locks. It is TASSA approved and recognised by a few insurance companies, making it a cost-effective investment that can give you the peace of mind that you need.